What are the maintenance skills of aluminum alloy doors and windows?

1. When cleaning aluminum alloy doors and windows, people try not to step on the aluminum frame, and do not use the frame as a support for people.

2. For aluminum alloy doors and windows, you can choose to use a soft cloth dipped in clean water or a neutral detergent. Do not use ordinary soap and detergent, let alone detergent with strong acid and alkali such as decontamination powder and toilet detergent.

3. After the rainy day, the wet glass and door and window frames should be wiped dry in time, and special attention should be paid to dry the water in the chute. The chute is used for a long time, the friction force is increased, a little oil or a layer of fire wax can be added

4. Frequently check the joints between the aluminum alloy frame and the wall. If there is any looseness over time, it will easily deform the frame as a whole, so that the doors and windows cannot be closed and sealed. Therefore, if the screws of the connection are loose, they should be tightened immediately. If the base of the screw is loose, apply a small amount of cement to seal with epoxy super glue.

5. Check the joints of the aluminum alloy frame frequently, tighten the bolts in time, and replace damaged parts. The vulnerable parts of aluminum alloy doors and windows, such as positioning shaft pins, wind braces, and floor springs, should be checked frequently and lubricated regularly to keep them clean and flexible.

6. Frequently check the joints between the aluminum alloy frame and the wall. If there is any looseness over time, it will easily deform the frame as a whole, so that the doors and windows cannot be closed and sealed. Therefore, if the screws of the connection are loose, they should be tightened immediately. If the base of the screw is loose, apply a small amount of cement to seal with epoxy super glue.

7. In ordinary use, the aluminum alloy doors and windows should be light, and push and pull should be natural; if you find that you have difficulties, you must not pull or push, and you should first eliminate the existing faults. Dust accumulation and deformation are the main reasons why aluminum alloy doors and windows are difficult to push and pull. Keep the door frame clean, especially the position of the sliding groove of the door and window. You can use a vacuum cleaner to remove a large amount of dust in the tank and inside the door seal.