1. Measuring window depth
When you measure the depth of the Single Louver Window, deduct the size of any objects that may hinder the free movement of the blades
Make sure that the shutter blades can rotate normally and freely. The measurement method of blinds is not the same as other similar roller blinds. The height and width of blinds need to be measured.
Only in this way can it be beautiful and practical. But in some cases, we also have to say based on the actual situation of the window.
2. Measure the opening size of the window
Use a steel ruler with precise scales to ensure the accuracy of the measurement results. Measure the dimensions of the six positions of left height, middle height, right height, upper width, middle width and lower width.
3. Built-in measurement method of window frame
Width: measure the high, medium and low width of the inner wall of the window frame respectively. Subtract 15 mm from the width, and then adjust to a multiple of 5 mm as the width of the curtain
When measuring the built-in window, we must pay special attention to not leaving it too long, or it will affect the normal up and down movement of the curtain
4. External measurement method of window frame
Width: the width of the actual window plus 100 mm; height: the height of the actual window plus 120 mm. Of course it should not be too high, so as to ensure the beauty.
